Basic Standards in Building Schooling Horse Jumps

You should first understand the basic standards for building a schooling horse jump. These standards relate to the dimensions, colors, stackability, safety, and various other factors. In this article, we will go over those aspects. After all, these are the basics that will make your schooling horse jump safe for you and your horse. Here are some guidelines:

Dimensions

The dimension of schooling horse jump varies according to the type of jumping course. Some jumps are square or parallel, while others have top rails that are different heights. In show jumping, the distance between the fences is usually five feet. Other types include oxers, verticals, and spreads. Listed below are the general dimensions of schooling horse jumps. 

When choosing the dimensions of your schooling horse jump, keep in mind the horse’s stride length. When a horse struggles with distance, you can adjust the jumps to match the horse’s stride. In addition to the jumps’ length, ensure the schooling horse jumps are safe and secure. Remember, safety is of utmost importance. While jumping, make sure that the rails are made from wood to avoid any possible damage.

Colors

The colors of schooling horse jump affect safety and performance. Horses have a unique way of seeing colors. Their vision is dichromatic, meaning they can only see one or two colors. However, they can recognize hidden objects and detect degrees of luminance. A study by Martin Stevens and Sarah Catherine Paul revealed the importance of fence colors for safety. Read on for the advantages of using different colors for schooling horse jumps.

If you’re working with a young horse and want to give it a more accessible introduction to jumping, you can use colorful schooling horse jumps. Colorful poles are an affordable way to introduce your horse to jumps and are also attractive. Choose colored poles in red, white, or black to build a low vertical jump. It might take several sessions for the horse to get used to jumping over a colorful jump.

Stackability

Several ways to improve the stackability of your schooling horse’s jumps. If the scope of the jumps is too short for your horse, consider teaching it to jump higher. This will allow you to compensate for the short range with more speed and momentum, but the horse’s scope will probably never be long enough to be an oversized jumper.

Safety

Setting up a safe course for your schooling horse is vital. In addition to building a level playing field, you can mold the jumping form of your horse by creating an obstacle course with the same elements on all jumps. However, while the occasional creativity is welcome, you need to think about what will encourage your horse and keep the course safe. Listed below are a few safety standards for building schooling horse jumps.

Build a stable with a large landing area. Your horse’s hoof should not touch the stumbling area. Make sure the landing area is padded with rubber wedges. Rubber wedges are 30 cm long ramps designed to reduce pressure on the landing area. These wedges help the horse land safely. When building a stable, keep safety in mind. Avoid draping over the jumps and standards if possible.

Prior art

The prior art of building schooling horse jumps includes a variety of devices for varying the configuration and shape of the obstacles. Some of the machines are axially rotatable beams, selectively controllable water jets, and a plurality of parallel poles driven in a direction perpendicular to their length. In addition, a safety mechanism allows the jump to be released if the horse or rider fails to clear it.

A typical equestrian jump consists of 2 vertical beams, a standard, and a set of feet that support the pole. Building a schooling horse jump is practical for any horse owner and can be completed relatively cheaply. Typically, a jump of this standard should cost less than USD 30 and can be completed in one afternoon. 

Refusal to jump in combination

When building schooling horse jumps, one of the things you should consider is a horse’s refusal to jump. While most horse riders check their legs for signs of soreness, this is not always the case. A horse who refuses to jump in combination may be suffering from a deep soreness in its medial gluteal muscles. You can test your horse’s muscles at home, but you should see a veterinarian first.

If the horse makes a sliding stop at a jump, it’s probably not a problem. Most horses that run out of the jump are simply untrained. However, sometimes they will go over without hesitation, saving the rider from disaster. If you notice your horse’s refusal to jump in combination, you’ll want to ensure that the jump’s take-off spot is safe.